Hymnorq 45 Degree Lock Miter Router Bit 2 Inch Diameter with 1/2 Inch Shank for 3/4 Inch Thick Stock Suitable for Joining Drawer Boxes, Cabinet Parts, and Building 4 Sided Columns

OVERVIEW The lock miter joint is an improvement over standard miter joints in box construction. The interlocking joint guarantees an accurate fit and the increased gluing area means a stronger joint. The lock miter joint is particularly suited to veneer plywood construction. This Migiwata will become one of the most useful bits in your tool box. You can use the lock miter bit to create a beautiful joint that is strong and very easy to assemble. This 45° lock miter router bit can create interlocking fingers that provide a strong mechanical locking action that makes woodcraft such as frame, cabinet, wardrobe or even closet project much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased long grain gluing surface also helps to strengthen the joint over a basic rabbet or butt joint. Why not use this bit on your next project? Humidors, jewelry boxes, drawers, hollow columns or almost any other project with squared corners can go from nice to jaw dropping by incorporating this joint. TECHNICAL DETAILS Material: C3 Tungsten Carbide Blades; Hardened Steel Alloy Body Shank Size:1/2 Inch (12.7mm) Cutting diameter: 2 Inch (50.8mm) Overall length: 2-5/8 Inch (66.7mm) Degree: 45° Number of Flutes: 2 WHAT’S INCLUDED 1/2" Shank 45° Lock Miter Router Bit X 1PC WARNINGS 1. Use only in a table-mounted router at reduced RPMs. 2. Do not bottom out bit in your router collet. Allow at least 1/8" gap. 3. Keep hands clear of bit. 4. Wear eye protection at all times.

• Cuts interlocking glue joints at corners. Pre-cut miters on table saw before routing; Eliminates the need for splines or biscuits on corners.
• The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operations.
• Solid steel bodies are precision machined to carefully controlled tolerances. A final CNC machine 600 grit wet grind on the carbide produces a clean, extremely sharp, and durable cutting edge.
• Bit bodies are coated to help prevent resin build up and make resin removal easier. High quality bearings are used on bits fitted with guide bearings. All bits are carbide tipped.
• For better safety, use this bit only on a router table with a fence – not free hand. Designed for professionals. Suggest reading how to setup this tool before use. Please make a test piece before starting a real project.